Power Plants & Aerospace
Copper-Nickel Alloy Tubing for Power Plant & Aerospace Works
Popular Standards
● EN1057 ASTM B163
● JIS H3300 RCC-M Section II
Process Flowchart
Seamless Pipe
Popular Industrial Copper and Nickel Alloy Materials
|
Alloy |
Type |
Composition |
Main Characteristics |
Common Applications |
| C12200 | Phosphorus-Deoxidized Copper | Cu+P (0.015-0.04%) | Excellent Weld-ability, good corrosion resistance, high conductivity | Plumbing, HVAC, piping |
| C44300 | Admiralty Brass | Cu-Zn-Sn + As/Sb | Excellent seawater corrosion resistance, biofouling resistance | Condenser tubes, heat exchangers, marine systems |
| C61400 | Aluminum Bronze | Cu-Al(6-8%)+Fe, Ni | High strength, excellent seawater/erosion resistance, wear-resistant | Marine propellers, pumps, valves, bearings |
| C63000 | Nickel-Aluminum Bronze | Cu-Al-Ni-Fe | Superior corrosion/erosion resistance, high fatigue strength | Aircraft components, heavy-duty marine parts |
| C68700 | Arsenical Aluminum Brass | Cu-Zn-Al-As | Outstanding biofouling/seawater resistance, good formability | Heat exchangers, condensers, desalination plants |
| C70600 | 90-10 Copper-Nickel | Cu-Ni(10%)+Fe/Mn | Excellent seawater corrosion resistance, weldability, moderate strength | Marine piping, offshore platforms, condensers |
| C71500 | 70-30 Copper-Nickel | Cu-Ni(30%）+Fe/Mn | Higher corrosion resistance & strength than C70600, thermal stability | Chemical processing, seawater systems |
| C93200 | High-Lead Tin Bronze | Cu-Sn-Pb | Excellent bearing properties, low friction, machinability | Bushings, bearings, thrust washers |
| Inconel 625 | Nickel-Chromium-Molybdenum | Ni-Cr-Mo-Nb | High strength, oxidation/corrosion resistance (acids/chlorides), fatigue-resistant | Aerospace, chemical procession marine |
| Hastelloy C276 | Nickel-Molybdenum-Chromium | Ni-Mo-Cr-W | Extreme corrosion resistance (HCI,chlorides)stress-corrosion cracking resistant | Chemical reactors,pollution control, oil & gas |
| Monel 400 | Nickel Copper | Ni-Cu(66% Ni,33% Cu) | Excellent resistance to seawater,acids and alkalis, good mechnical strength | Marine engineering, chemical tanks, valves |
| Incoloy 825 | Nickel-Iron-Chromium | Ni-Fe-Cr-Mo-Cu-Ti | Sulfuric/phosphoric acid resistance, high-temperature stability | Chemical processing, acid storage, nuclear |
| Nickel 200 | Pure Nickel | 99.6% Ni | Outstanding corrosion resistance(alkalis,salts),high thermal/ conductivity | Chemical equipment, food processing, electronics |
Cold Finished (Cold-drawn or Cold-rolled) Seamless Tube Sizes Available
- Table 01 Unit: MM
- Table to be continued:
Hot Finished Seamless Pipe Sizes Available
Table 02 Unit: MM
Table 03 Unit: MM
Tolerance on Dimensions
Table 04 Tolerance on Out Diameter Unit: MM
| Standard | Hot Finished Seamless Tube | Cold Finished Seamless Tube | ||
| Outside Diameter (mm) | Tolerance | Outside Diameter (mm) | Tolerance | |
| EN10216-1 EN10216-2 DIN 17175 | ≤100 >100 | ±0.75% (min. ±0.5mm) ±0.90% | All ±0.5% (min. ±0.30mm) | |
| 10～30 ±0.40mm | ||||
| GB/T 3087 | ≤460 | ±0.75% (min. ±0.5mm) | >30～50 ±0.45mm >50 ±1.0% | |
| GB/T 5310 GB/T9948 GB/T6479 | <57 ±0.40mm | ≤30 ±0.20mm | ||
| 57~325 ±0.75% | >30～50 ±0.30mm | |||
| >325~460 +1%,-2mm | >50 ±0.8% | |||
| <25.4 ±0.10mm | ||||
| ASME SA-179M ASME SA-192M ASME SA-209M ASME SA-210M ASME SA-213M | ≤101.6 +0.4,-0.8mm | >25.4～38.1 ±0.15mm | ||
| >38.1~50.8 ±0.20mm | ||||
| >50.8～63.5 ±0.25mm | ||||
| JIS G3461 JIS G3462 | 101.6-190.5 +0.4,-1.2mm | >63.5~76.2 >76.2 | ±0.30mm ±0.38mm | |
| ASME SA-106 ASME SA-335 | ≤48.3 ±0.40mm 48~3-114.3 ±0.79mm 114.4~219.1 +1.59,-0.79mm | ≤48.3 ±0.40mm | ||
| 219.2~323.9 ≥324 | +2.38,-0.79mm ±1.0% | >48.3 ±0.79mm | ||
Table 05 Tolerance on Wall Thickness Unit: MM
|
Standard |
Hot Finished Seamless Tube |
Cold Finished Seamless Tube |
|||
|
Outside Diameter OD(mm) |
Wall Thickness T(mm) |
Tolerance |
Outside Diameter Wall Thickness OD(mm) T(mm) |
Tolerance |
|
| S≤2Sn | +15%,-10% | ||||
| ≤130 | 2Sn<S≤4Sn | +12.5%,-10% | |||
| S>4Sn | ±9% | ||||
| DIN 17175 … … | |||||
| S≤0.05da | +17.5%,-12.5% | ||||
| >130 | 0.05da<S≤0.1lda | ±12.5% | |||
| S>0.1lda | ±10% | All | ±10% (min. ±0.2mm) | ||
| ≤219.1 | ±12.5%(min. ±0.4mm) | ||||
| EN10216-1 EN 10216-2 | T/D≤0.025 | ±20% | |||
| 0.025<T/D≤0.050 | ±15% | ||||
| 0.05<T/D≤0.10 | ±12.5% | ||||
| 0.1<T/D | ±10% | ||||
| GB/T 3087 | ≤20 | +15%,-12.5% (min.+0.45,-0.35mm) | 1.0~3.0 | +15%,-10% | |
| >20 | ±12.5% | >3 | +12.5%,-10% | ||
| GB/T 5310 GB/T 9948 GB/T 6479 | <4.0 | +15%,-10% (min.+0.48,-0.32mm) | 2~3 | +12%,-10% | |
| 4-20 | +12.5%,-10% | >3 | ±10% | ||
| >20 | ±10% | ||||
| ASME SA-179M ASME SA-192M ASME SA-209M ASME SA-210M ASME SA-213M JISG3461 JISG3462 | 2.41-3.8 | +35%,-0% | ≤38.1 | +20%,-0% | |
| 3.8-4.6 | +33%,-0% | >38.1 | +22%,-0% | ||
| >4.6 | +28%,-0% | ---- | |||
| ASME SA-106 ASME SA-335 | All | ±12.5% | All | ±10% | |
For more details on specific carbon and alloy steel tubing and pipes, please refer to the specific product details or contact us at your convenience.